Heavy Duty e3D mount - FanMOD "Optimized23"
Heavy Duty e3D mount - FanMOD "Optimized23"
3D
Published 2019-02-11T12:28:45+00:00
Original: Despite a 3mm thick silicone sock, significant temperature fluctuations were observed .
Before the conversion, I came to a different temperature of more than 10 degrees from the setpoint, when the fan operation changes from 0 to 100, both sides. And now no more than maximum 3 degrees with a really bad constellation (z0)
Some Mods:
Adapted air duct opening for an optimum air flow
Fan guide in which everyone I know fits 5015 radial fans. Whether Sunon, Titan or any other company.
Guide depth of the screw, so that the fanduct can be higher,
longer guidance so that it can also be deeper
adapted fanduct so that the heatblock is cooled less but more the object.
basic principle
Heavy Duty customisable modular e3D V6 mount Volcano 5015 ABL
the duct from:
e3D V6 Part Cooling Wing 40mm Fan for Heavy Duty Modular e3D V6 Mount"
idea 4 longer guidance:
Tornado/CR-10 - Heavy duty longer blower mount
can use for all Heavy Duty remixes and clones
and orginal duty E3D or Creality´s Clone
| 发表的日期 | 11/02/2019 |