Hotwheels Audi Sport Quattro Display Base
Hotwheels Audi Sport Quattro Display Base
3D
Published 2022-02-23T09:03:35+00:00
Description
A base for Hotwheels Audi Sport Quattro from the Thrill Climbers set, it should work with the mainline basic version as well.
The display base is separated into 3 parts, name plate, the base and the back plate.
Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on BoxBackAssem:
1) Layer 19 (Outer line of both stripe and "Audi Sport Quattro" lettering, mine is black)
2) Layer 24 (Middle stripe colours, mine is grey)
3) Layer 29 (Left stripe colour, mine is red)
4) Layer 34 (Both horizontal stripe, mine is yellow)
Filament change layer for colours on name plate:
1) Layer 7 (Lettering on name plate)
Colours
Colours of all other items is your choice.
Assembly
The car is tied with metal wire through the display base holes, the wire will need to be slide between the wheels and the metal body.
Back plate should slide in nicely into the display base. The name plate might need some trimming to the side to fit into the box.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
| 发表的日期 | 23/02/2022 |
| 支持自定义 | YES |