Hotwheels Dodge Challenger SRT Demon Display Base
Hotwheels Dodge Challenger SRT Demon Display Base
3D
Published 2022-02-21T15:53:51+00:00
Description
A base for Hotwheels Dodge Challenger SRT Demon, it should work with any Dodge Challenger SRT Demon from Hotwheels.
The display base is separated into 5 parts, name plate, the base, the back plate, divider and light tree. Back plate is separated to the base so that it can be easily printed in multi colour.
Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on backplate:
1) Layer 19 (Outer zone of "Demon" lettering, mine is silver)
2) Layer 24 (Inner zone of "Demon" lettering and the Demon logo)
Filament change layer for colours on name plate:
1) Layer 8 (Lettering on name plate)
Colours
The colour of the ligh tree is best printed in white so it can be coloured with marker pens.
Colours of all other items is your choice.
Assembly
The divider, light tree and white line need to be glued or stick with double sided tape to the base.
The car is tied with metal wire as shown in the picture above. The holes on the base plate is arranged to fit the Hotwheels Dodge Challenger SRT Demon perfectly.
Others
The transparent box I'm using to store the base and car in the first picture is bought from here: Here
| 发表的日期 | 21/02/2022 |