Hotwheels Mercedes C Class DTM & Mercedes CLK GTR Display Base (D2 Theme)
Hotwheels Mercedes C Class DTM & Mercedes CLK GTR Display Base (D2 Theme)
Published 2022-03-04T10:47:03+00:00
The display base is separated into 3 parts for easy printing and colour swap. The parts are:
1) Base
- BaseV2.STL
2) Base back wall:
- BoxBack.STL
3)Flat Base
- FlatBase2 (Angle).STL
Print Settings
Nozzle size = 0.3 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "FlatBase2 (Angle)":
1) Start (Base colour, mine is in black)
2) Layer 9 (All lettering colours, mine is in grey)
Filament change layer for colours on "BoxBack":
1) Start (Small "D2" pattern, mine is in white)
2) Layer 6 (Overall base colour, mine is in grey)
3) Layer 9 (D2 Privat lettering, mine is in blue)
4) Layer 16 (Top of "2", mine is in red)
Assembly
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base, the flat plate should fit into the base nicely too. The flat base will need to be glued or have double sided to keep it from falling off the base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
发表的日期 | 04/03/2022 |
让时间去下载 | 960 - 分钟 |
尺寸大小 | 163mmx120mmx90mm |
支持自定义 | YES |