Ikea Lack Lightbox
Ikea Lack Lightbox
3D
Published 2019-08-29T12:30:12+00:00
The Lack Table Lightbox is a project which uses the same concept as lack enclosures, but is instead intended for photography. By enclosing the rear and side walls with matte white walls to reflect light, and illuminating the area with strong LEDs mounted above, we can take professional quality photos.
This is a remixed lack enclosure design, modified to include M5 bolt holes for both inner and outer walls that securely fasten on the inner side with nuts.
The overall leg design was extended to 209mm (8.2") to accommodate larger objects, in my case taller 3D Printers such as the Creality Ender-3 and Creality CR-10. The additional extension length brings the total area height to 24" once assembled.
This part is designed and shared as part of an on-going project guide at letsprint3d.net which will be published in the near future.
| 发表的日期 | 29/08/2019 |
| 支持自定义 | YES |
