Incognito Egg #TinkercadEaster
Incognito Egg #TinkercadEaster
Published 2018-04-05T16:09:52+00:00
This object was made in Tinkercad. https://www.tinkercad.com/things/4kiQ9Wk2tHn
A video explanation of this design on Youtube at #TinkercadEaster Contest Submission
Simple Easter Egg puzzle in disguise. Pat Meehan Designed Incognito Egg. 9 print files.
Designed for child 3-6 yrs.
I have uploaded a photo of a 50% scale test print of an early version of the 6 egg pieces. They do fit to gether as I had envisioned, but the wall thickness is a little thin in this version and there was some warping in the wall of the middle red ring. The uploaded model on MyMiniFactory is a more robust design. When I receive my new prints I will upload them.
I suggest downloading all of the part files and print them separately with the color suggested in the title of each file. For example incognito-egg-orange-part-9-of-9-tinkercadeaster.stl is an orange part. Then when combined the finished product looks like a decorated Easter Egg.
Attempts to print multiple parts of the same color at the same time failed th the maker station I used. Single part printing was sucessful so far.
The Ultimaker Cura software suggests that the medium print speed with a 0.1 layer height and a 50% infill rate would take almost 3 days to complete. Printing parts separately would be faster & require less support.
发表的日期 | 05/04/2018 |
材料数量 | 322g (50% infill) |
尺寸大小 | 89.9 x 86.9 x 137.9 mm |
打印工艺 | FDM |
复杂程度 | 容易 |