ipad, ipad mini or tablet universal holder
ipad, ipad mini or tablet universal holder
3D
Published 2018-01-24T15:33:36+00:00
I made this ipad holder for a treadmill so it is thick and large in size to stand the vibration. It will hold any ipad, ipad mini or android tablet between 4 and 10 inches (10.6cm x 25.4cm) wide as it has a sliding top arm . I also included files for a wall bracket ( NOT PICTURED) if you wish to mount it on the wall instead of using the clamp. Clamp opens up to 2.75 inches ( 7cm) to fit any desk or treadmill.
You can print one or more of the arm extension to make the holder longer or shorter with more or less pivoting points. You may also be able to scale it before printing for a cell phone holder although I have not tried that. (scale to 50% to use M3 bolts)
Nuts and bolts used are 1/4" x20 thread, but you could also use a M6 bolt.
printed with:
nozzle - 0.4
layer height 0.2
shell - 1.6 mm
bottom/top - 1.6 mm
infill - 28% - 50%
speed - 40 mm/sec
support - yes - everywhere
platform - Brim
heated bed with glass 70C
| 发表的日期 | 24/01/2018 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |