Joels "High Five" Spoolholder
Joels "High Five" Spoolholder
Published 2018-08-03T16:18:21+00:00
My entry for the 3D contest by Joel Telling, aka 3D Printing Nerd.
It's a simple form, but I used some elaborate tricks in Fusion360 to get it using a bit less material. Or maybe there are easier ways to do this :-)
It even has a 'High Five' hand on the front! :-)
Unfortunately, I could not print it myself, because my printer is simply not big enough...
The main curve should not give problems. I used a 45° chamfer to get rid of the sharp edge. With reasonable bridging capabilities of the printer, the spool arm should also work.
The whole object is simple to use: just hang it on on of the top wood shelves, and let the bottom rest against the lower shelf.
@MatterHackers @MyMiniFactory @3DPrintingNerd
ok
发表的日期 | 03/08/2018 |
让时间去下载 | 170 - 340 分钟 |
材料数量 | 22 |
尺寸大小 | 100 169 13 |
打印工艺 | FDM |
复杂程度 | 容易 |
支持自定义 | YES |