Key, the Loch Cinder Monster
$3.50 Key, the Loch Cinder Monster
3D
Published 2023-06-30T20:08:17+00:00
"Key" prints with it's neck on the print bed and comes PRESUPPORTED right underneath it. When does printing its an easy snap to break it off! The neck then "CLICKS" in place in the upright position and holds that position! The original size is pretty big and I would personally say the sweet spot size is 60% or 50%. For smaller prints (60% and below) it's recommended to use a brim.
----------------------
Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!
This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially.
If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below!
The Digital files are never to be re-sold, shared, or given away!
Please share images of your creations here by clicking on +Add your picture! I would love to see them! :)
Commercial License and monthly bonus models:
Tribes
Patreon
To see all things Cinderwing3D, including all of our models (public and exclusive bonus ones) visit our website:
Cinderwing3D Website
Please see our other public models here:
The Cinderwing3D MMF Store
Check us out on our socials!
Facebook | Twitter | Instagram | Tiktok
FDM Settings
3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues
Resin Settings
No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.
Be aware, this model may not present best in resin due to snap in neck, please proceed with caution.
Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town
testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.
| 发表的日期 | 30/06/2023 |
| Price | $3.50 |
| 支持自定义 | YES |
Printed at 60% with a rainbow filament