Kick Drum SD/Micro SD Card Holder
402
views
26
downloads
0 comments
Loading comments... 
Kick Drum SD/Micro SD Card Holder
3D
Published 2022-11-21T11:48:14+00:00
2
0
Add to Collection
Description
This SD cardholder was inspired by the drummer of my band who recently began pursuing professional photography. Features include:
- Threaded top and bottom lids
- 6 SD Card Slots
- 12 Micro SD Card Slots
- "Secret" compartment for storage (approx 3 cubic inches of storage)
This design is uploaded with a non-commercial license. If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at https://www.patreon.com/thinair3D
允许
Printing Details
Printing Info:
- The two lids were designed to have the open side facing the build plate (only way to get the details on the top :/ ), so you will need supports on both sides. I would highly suggest tree supports, I haven’t had any issues removing mine.
- For the main body, print with the sd card sides facing up. You shouldn’t need any supports for the secret storage area, although they may be helpful if your bridging isn’t great.
- Infill: You should be fine with standard 10-15% infill max and it will be plenty strong.
- Layer Height: I have only tested this model with a 0.2 layer height and am unsure of how the threads would print with a higher layer height, so attempt at your own risk!
Technical Information
| 发表的日期 | 21/11/2022 |
More Information
Object Parts