AEKNGA02 - Konga Sacrifice
$4.00 AEKNGA02 - Konga Sacrifice
3D
Published 2021-02-09T20:03:50+00:00
This set of 3D printable terrain augments the Konga Rising terrain with a new set piece — a large 6×6″ sacrificial rock. There are versions with a Dragonbite base and without (in case you want to lay it on top of existing terrain), as well as a bonus dirt tiles and a 4×4 version. The scatter top prints separately for additional utility and easy storage.
We love apes at Aether Studios, many of our friends and peers consider us insignificantly evolved from our primate brethren, but we can’t help feeling stronger, together, with them. Will and Nasos have been Planet of the Apes fans since forever, and pretty much every ape movie since. We love apes.
NOTE: your printer must have at least a 6″x6″ print area to print the biggest of these pieces!
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| 发表的日期 | 09/02/2021 |
| Price | $4.00 |
| 支持自定义 | YES |