Light Up Prop
Light Up Prop
3D
Published 2019-06-20T08:40:14+00:00
https://www.youtube.com/watch?v=1mjLYIl42cg
In this project we’ll show you how to build a light up prop using Adafruit’s prop-maker! This is fully 3D printed and has a collapsible blade. It’s made from segments that are tapered so it can retract. It makes a pretty cool effect when you swing it around.
DIY Electronics & Props
All of the electronics are housed inside the 3D printed hilt. It’s also got an accelerometer for motion activated sound effects. It plays different sounds for swings and hits. They’re also randomized and feel pretty responsive to your motion. The blade is removable and the hilt makes a pretty sweet flashlight. Inside the emitter is an insanely bright 3W RGB LED.
Latest Parts List
Adafruit Feather M4 https://adafru.it/3857
Adafruit Prop-Maker FeatherWing https://adafru.it/3988
3W RGB LED https://adafru.it/2530
2200mAh battery https://adafru.it/1781
Mini oval speaker https://adafru.it/3923
Mini panel mounted toggle switch https://adafru.it/3221
4-pin JST PH cable (socket) https://www.adafruit.com/product/4045
4-pin JST PH cable (male) https://www.adafruit.com/product/3955
2-pin JST PH extension cable https://www.adafruit.com/product/1131
Header kit for Feathers https://www.adafruit.com/product/2886
Tutorial Learn Guide
https://learn.adafruit.com/prop-maker-light-wand/
Code on github
https://github.com/adafruit/Adafruit_Learning_System_Guides
Designed to fit John Mulac's @3dprintingworld collapsing blade
https://www.thingiverse.com/thing:3606120/files
https://www.thingiverse.com/3DPRINTINGWORLD
| 发表的日期 | 20/06/2019 |
| 支持自定义 | YES |