Lighthouse
Lighthouse
3D
Published 2019-12-27T14:25:17+00:00
This model of a lighthouse is full of details. Featuring a tall lighthouse with windows all around, it has a lot of detail while remaining easy to print. There is even a house connected to the lighthouse, for any inhabitants to live in.
If you enjoy this design, please check out this collection of architectural models that are easy to print and full of details:
https://www.myminifactory.com/users/AlexTStudios/collection/architecture-collection
Print this model with at least 0.6mm of walls / top / bottom and 25% infill. This model can be printed at a variety of sizes; however, for best results, print at a larger size. Supports are not required; however, if your printer has a hard time handling overhangs, you might want to turn them on.
| 发表的日期 | 27/12/2019 |
| 支持自定义 | YES |
I printed this lighthouse, I think at about 50% scale. Detail was nice, even showed through at such a small scale (layer height of 0.16) Great model! Will print many more of your creations.