Make Daniel Noree F1 car really fuctional
Make Daniel Noree F1 car really fuctional
3D
Published 2020-05-29T12:22:32+00:00
Here is a new set of wheels for Daniel's Noree F1. They were modify so that you can make them 1.5 times bigger (rescale X and Y) using the same axle (front and rear). You will have to slightly cut the rear chassis to fit the new wheels but they are definitely worth it!!! The tires are printed with FLEX (no need to rescale them) with no infill, they are soft and with good grip. I also added the stl file for a modified motor cover, with an opening to cool down the electric motor AVOIDING YOUR CAR TO MELT OVER TIME!!! And finally, enjoy this robust new nose, it is not that statically nice but definitely more functional.
Lastly, just a suggestion.. DO NOT PRINT THE DIFFERENTIAL it really sucks!
These are the setup for the tires (No need to use support). you can print everything else with your regular PLA setup... you will need to add support for the nose, motor cover and rims.
Updates: I just finished the new rear chassis with more ventilation for the motor and gear protection!!! Enjoy, you don't need supports to print it.
| 发表的日期 | 29/05/2020 |