Mars 2020 Perseverance insignia (keychain)
Mars 2020 Perseverance insignia (keychain)
3D
Published 2021-03-08T10:06:44+00:00
This is derived from the logo / insignia of the Mars 2020 Perseverance rover mission. It's pretty easy to make, but I haven't found it, so I made it.
Feel free to improve this model. All I ask is that you mention my name if you use my files.
I recommend printing with 2 colors. You can easily achieve that using CURA's pause at height script and switching filaments. You can also try to pause the print at the right moment and swap filaments, but this may result in some frustrating results.
You should use thick walls and top/bottom so the print is not too transparent and more rigid.
You will find a version with the star left empty so you can easily make this a keychain.
Feel free to scale it up or down. I printed mine at a 35mm diameter. You can also make it thicker by scaling the z axis only.
I haven't tried printing the insignia with the star too. I suspect it may not print correctly due to the thin branches of the star.
You can find a similar svg file to the one I used here.
| 发表的日期 | 08/03/2021 |
| 支持自定义 | YES |