micro:bit Telegraph
micro:bit Telegraph
3D
Published 2016-08-17T12:04:00+00:00
An easy to print telegraph machine for the BBC micro:bit.
Assembly:
1 - Place th micro:bit in the base, align it with holes and attach it to the base with motherboard standoff's.
2 - Using the provided pin, or a M3 screw attach the arm to the pivot piece, notice that the small protusion in the pivot piece should be sticking out
3 - Slide the limit piece through the arm
4 - Slide the pivot piece in the corresponding slot in the base of the unit, after it has been securely placed slide the limit piece to the base of the unit
5 - Place the button in the corresponding hole in the arm and place a small rubberband connecting the harm and the pivot piece
6 - You are now ready to start sending messages using your brand new telegraph machine
Here is a simple one for you to start: .... . .-.. .-.. ---
Each dot is a quick touch on the telegraph machine and each dash a longer one.
For help translating messages and sending them check here: http://morsecode.scphillips.com/
| 发表的日期 | 17/08/2016 |
| 让时间去下载 | - 116 分钟 |
| 材料数量 | 22g |
| 尺寸大小 | 56mm x 145,5mm x 32.4mm |
| 打印工艺 | FDM |
| 支持自定义 | YES |