Mini GT/Hotwheels Porsche Taycan Turbo S Display Base
Mini GT/Hotwheels Porsche Taycan Turbo S Display Base
3D
Published 2022-02-25T09:42:23+00:00
Description
A base for Mini GT Porsche Taycan Turbo S, it should work with all Mini GT Porsche Taycan Turbo S.
There is also a Hotwheels variant of Porsche Taycan and I have included a variant of that display base thanks to Stanleylovesbacon from Thingiverse measurements of the car.
The display base is separated into 3 parts for easy printing and colour swap. The parts are:
1) Name plate (NamePlateAssem.STL)
2) Base (BaseV2.STL and Base (Hotwheels).STL)
3) Base back wall (BoxBackAssem.STL)
Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BoxBackAssem":
1) Start (Background colour, mine is in white)
2) Layer 19 (Taycan silhoutte, "Taycan Turbo S" lettering and "Porsche" lettering outline, mine is in black)
3) Layer 24 ("Porsche" lettering colour, mine is in red)
Filament change layer for colours on "NamePlateAssem":
1) Start (Background colour, mine in white)
2) Layer 6 (Taycan silhoutte and "Soul, Electrified." outline, mine is in black)
3) Layer 11 ("Soul, Electrified" lettering, mine is in blue)
Assembly
The car is tied by wires through the hole in the base
Back plate and name plate should slide in nicely into the display base. Name plate could be a little loose, double sided tape or some glue with keep it secured nicely.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
| 发表的日期 | 25/02/2022 |
| 支持自定义 | YES |