Miniature Laptop insert for Hinged Mini Pelican Case 2.0
Miniature Laptop insert for Hinged Mini Pelican Case 2.0
3D
Published 2021-06-07T04:31:56+00:00
A Miniature Laptop insert for the Hinged Mini Pelican Case.
Files for the normal sized case are labeled "PelicanCase_v3".
Files for the mini sized case are labeled "PelicanCase-mini_v3".
The keys are used for the both of them.
The Bezel and Main body should pressure fit into the pelican case but the keys and touchpad needs to be glued into their slots.
The display can fit a 26x33mm picture for the normal version and a 22x33mm picture for the smaller version but I just used blue pieces of paper. You can also optionally make a 10mm wide strip of paper or thin plastic and slide it into the gaps in the bezel and main body to make a fake display cable.
Refer to the attached images for assembly and STEP files are also available if you want to adjust the fit or modify it.
Keyboard is from thingiverse.com/thing:3696285
ORIGINAL FILES (YOU WILL NEED TO PRINT THESE): thingiverse.com/thing:1874675
- Originally posted to thingiverse on 5/6/2021
Printer brand:
Creality
Printer:
Ender 5
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2 mm
Infill:
20
Filament brand:
Hatchbox
Filament material:
PLA
Notes:
Print Keys and Main body in different colors. Print the main body with the holes for the keys and touchpad facing up. Does not need supports if your printer can make 30mm bridges. If the surface of the keys are rough then turn on ironing.
| 发表的日期 | 07/06/2021 |
| 支持自定义 | YES |