MOLLE Webbing 3x AAAA Battery Holder
$5.00 MOLLE Webbing 3x AAAA Battery Holder
Published 2022-02-04T17:34:48+00:00
A simple 3x AAAA (Quadruple A) battery holder clamp that attaches to standard MOLLE webbing. Held in pretty secure.
Push bottom (negative terminal) of battery into bottom 'cup', then apply pressure to positive terminal to click into place unter the tab notch. Remove by opposite process--pulling positive end out first, then sliding out of negative terminal 'cup'.
Size: 9.2cm (length) x 3.1cm (width) x 2.1cm (height)
Good for airsoft, paintball, milsim, or any actual real-steel use for stuff like target practice or hunting
Needs a fair amount of supports to print. I printed successfully with 2mm treelike supports w/ 4mm base @ 4mm height. (ABS) Recommend printing with 100% infill in ABS or similar durable material
Needs a fair amount of supports to print. I printed successfully with 2mm treelike supports w/ 4mm base @ 4mm height. (ABS) Recommend printing with 100% infill in ABS or similar durable material
发表的日期 | 04/02/2022 |
Price | $5.00 |
尺寸大小 | 9.2cm (length) x 3.1cm (width) x 2.1cm (height) |