Mythical bunragon (Bunny + Dragon)
$8.99 Mythical bunragon (Bunny + Dragon)
3D
Published 2024-04-03T10:00:49+00:00
I know it's very daring, but it had to be done. We were brainstorming ideas for a dragon and then we thought how crazy it would be to combine an Easter bunny with a dragon. Since we sometimes just want to make unusual designs where not everyone is designing, we had to implement this :D
As we have discovered, you are true artists when it comes to painting eyes. Therefore, we have uploaded a design with empty eyes so that you can color it as you wish. I'm already looking forward to the numerous photos
This is how our mythical bunragon was created. What do you think about that? Too crazy or just amazing?
--------------------------------------------
EASY PAINTING SYSTEM
We have installed easy painting system. This puts an end to annoying painting. All you have to do is click [fill] in the slicer and you can completely color the predetermined areas with one click. This means you can color anything in the color you want in under 30 seconds. Provided your printer has a multi-color printing function.
Some slicers like Simplyfy3D have problems with the easy painting function because they do not support this function. If anyone has problems, just report them in Discord and we will put together a special file for you.
-------------------------------------------------
DISCORD
We have created a Discord channel for direct support and ongoing projects. If someone has problems, you can request personal help there or the community can also support you if you have problems. We report on ongoing projects. You can also request and contribute ideas. 3D printing is simply more fun together.
The invitation comes immediately with access to our exclusive design.
Print parameters. We recommend:
first layer height 0.16mm (If someone wants something a little finer, then with 0.12)
layer height 0.16 mm (If someone wants something a little finer, then with 0.12)
Wall lines: 2
Fill density: 15%
Support: no support needed
We also provide a 3MF file with the recommended settings. We created the 3MF file via Bambu Studio. We therefore recommend the 3MF file only for Bambu Studio users
| 发表的日期 | 03/04/2024 |
| Price | $8.99 |
| 支持自定义 | YES |