Near East University Ventilator Splitter
Near East University Ventilator Splitter
3D
Published 2020-04-14T11:33:52+00:00
Near East University - Ventilator Splitters
v1 is suitable for 22mm hoses
v2 has one 22mm opening, and two 25.5mm opening.
Depending on the nature of the disaster, many otherwise plentiful hospital supplies, such as ventilators, may suddenly become insufficient to support the demand. In the event of a large influx of patients in respiratory distress, the number of ventilators available may not be enough to support all of the patients.
As with other similar efforts, THIS IS UNCERTIFIED, HIGHLY EXPERIMENTAL, and UNTESTED ON HUMANS. As such, any potential use scenario would also require legal waivers to use uncertified/untested non-medical devices and significant additional patient monitoring by medical professionals and certified diagnostic equipment to reduce the risk of serious consequences in the event that the device fails to operate as intended by doctors. Use at your own risk. We take no responsibility for the safety of this device/design.
Print with PLA, 0.15mm, and 3 shells for airtightness.
| 发表的日期 | 14/04/2020 |
| 让时间去下载 | 120 - 150 分钟 |
| 材料数量 | 24 |
| 尺寸大小 | 29.9x76.5x89 |
| 支持自定义 | YES |