Nintendo Switch Tower
Nintendo Switch Tower
Published 2021-04-30T12:23:51+00:00
An accessory for the Nintendo Switch to hold Switch, Joy-Con, Joy-Con Strap and games.
There is 2 versions of files :
Version for mounting with screws ; the files have "_screw" extension
Version for mounting with glue ; the files have "_glue" extension
Print Settings
Screw version :
1 x BodyBottom_Screw : Layer:0.20mm Raft:no Support:no Infill:20%
1 x BodyLeft_Screw : Layer:0.20mm Raft:no Support:no Infill:20%
1 x BodyMiddle_Screw : Layer:0.20mm Raft:no Support:no Infill:20%
1 x BodyRight_Screw : Layer:0.20mm Raft:no Support:no Infill:20%
1 x BodyTop_Screw : Layer:0.20mm Raft:no Support:no Infill:20%
1 x DrowerBack_Screw : Layer:0.20mm Raft:no Support:no Infill:20%
1 x DrowerFront_Screw : Layer:0.20mm Raft:no Support:no Infill:20%
1 x JoyConHolder_Screw : Layer:0.20mm Raft:no Support:no Infill:100%
1 x JoyConStrapHolder_Screw : Layer:0.20mm Raft:no Support:no Infill:100%
1 x SwitchHolder_Screw : Layer:0.20mm Raft:no Support:no Infill:20%
Glue version :
1 x BodyBottom_Glue : Layer:0.20mm Raft:no Support:no Infill:20%
1 x BodyLeft_Glue : Layer:0.20mm Raft:no Support:no Infill:20%
1 x BodyMiddle_Glue : Layer:0.20mm Raft:no Support:no Infill:20%
1 x BodyRight_Glue : Layer:0.20mm Raft:no Support:no Infill:20%
1 x BodyTop_Glue : Layer:0.20mm Raft:no Support:no Infill:20%
1 x DrowerBack_Glue : Layer:0.20mm Raft:no Support:no Infill:20%
1 x DrowerFront_Glue : Layer:0.20mm Raft:no Support:no Infill:20%
1 x JoyConHolder_Glue : Layer:0.20mm Raft:no Support:no Infill:100%
1 x JoyConStrapHolder_Glue : Layer:0.20mm Raft:no Support:no Infill:100%
1 x SwitchHolder_Glue : Layer:0.20mm Raft:no Support:no Infill:20%
5 x SwitchHolderPlug_Glue : Layer:0.20mm Raft:no Support:no Infill:100%
Accessories
For Screw version :
6 x m3x40mm SHCS
6 x m3x10mm SHCS
21 x m3x5mm SHCS
33 x threaded inserts
For Glue version :
Glue
Assembly
Look at pictures.
For screw version, BodyBottom_Screw and BodyMiddle_Screw are fixed with 6 x m3x40mm SHCS.
发表的日期 | 30/04/2021 |