Norse Box (desk casket)
Norse Box (desk casket)
3D
Published 2024-03-21T15:46:08+00:00
just got bored
Box:
Valkyrie for CNC
https://www.thingiverse.com/thing:3892442
Valkyrie for CNC remix (fixed missing face on the back)
https://www.thingiverse.com/thing:5166724
Slavic God Emperor (For CNC)
https://www.thingiverse.com/thing:3909518
Freya buckle for CNC
https://www.thingiverse.com/thing:4123037
Handles:
Viking arm ring
https://www.thingiverse.com/thing:2369433
Lid:
horses running
https://www.thingiverse.com/thing:507074
Legs:
Table Louis XIV
https://www.thingiverse.com/thing:3010495
Print Settings
Printer:Cr-10
Rafts:Yes
Supports:Yes
Resolution:.1mm
Infill:20%
Notes:The Cross bracing (supports) for the legs were designed solely to keep the legs from falling over when printing standing up. The one I printed no longer has these braces. If you want to keep them you could flip the box over. I tried to make the box so it wouldn't need supports when printing in this manner but nothing I tried worked.
Alternatively place the box in ultimaker cura standing up. Move the box along the Z axis to -77.5 you can either just print this half or multiply the box and flip it over. Move this duplicate to -158.2969 and print. Removing the printed supports will be difficult but working slowly and carefully should allow you to remove the supports without breaking the cross bracing.
SUPPORT SETTINGS
structure: Normal
Placement: everywhere
Overhang angle: 60 degrees
Support pattern: zigzag
Support wall line count: 1
Line density: 5%
line distance: 8mm
roof thickness: .4mm
floor thickness: .4mm
| 发表的日期 | 21/03/2024 |