ODST Helmet
ODST Helmet
3D
Published 2015-06-06T23:21:45+00:00
This is a scaled down replica helmet of the ODST helmet from a popular gaming franchise. The model took me about 15 hours to model in Fusion 360. The time it takes to print the model will greatly depend on your printer's specs. At my work I tested it on our own custom built printers, with a E3D Volcano nozzle with a .6mm layer hieght, and it took about 2 hours with support. on a normal nozzle I estimate about 6 hours with a layer hieght of .3, and an infill of 10%. Feel free to post photos of your print on my page I love seeing what people do with the models I make!
Print at 0.2 mm layer height, with 10% infill. This uses 172 g of filament and takes 25 hours and 12 minutes.
| 发表的日期 | 06/06/2015 |
| 让时间去下载 | 1512 - 1522 分钟 |
| 材料数量 | 172 g |
| 尺寸大小 | 116 mm x 95 mm x 118 mm |
| 复杂程度 | 容易 |
