Overwatch Coasters and Coaster Holder
Overwatch Coasters and Coaster Holder
3D
Published 2020-09-11T09:36:34+00:00
The coasters are optimized to be printed at .20 mm height. The Prusa slicer can be used to easily set 2 filament changes at the top levels to make a multicolored coaster set. There will be a .4mm height difference in the final layers of the print but I was able to verify that it will not cause beer bottles or cups to tilt or tip over as there is other material to hold it up and keep it leveled.
The holder can accommodate up to 8 of the included Overwatch logo coasters and is comprised of 5 different models. Please view the exploded diagram to see how they fit together and how many pieces to print of each component.
The lid of the coaster holder should be printed in the orientation it is set to. Just make sure to include removeable supports at the bottom because the lip around the bottom of the lid will fit into the bottom box.
The pieces are not pressure fitted but should stay put with crazy glue or your preferred adhesive for 3d prints.
Happy printing!
| 发表的日期 | 11/09/2020 |