Planter
1,095
views
69
downloads
1
collection
0 comments
Loading comments... 
Planter
3D
Published 2021-01-06T16:38:44+00:00
7
0
Add to Collection
Description
This is my take on a self watering planter. Water can be fed from the side. The inner part can be taken out. Only the bottom is covered with holes which form a helix from the bottom up.
The inner Part you can print without support. Only the holes I had to punch with a screw driver. The potiself I also printed without support. But the bottom curve is hard to print without and I would recommend support for everything which touches the build plate.
With a 0.5mm nozzle it took me 6-7h hours to print the Pot and another 3h for the inner part.
允许
Printing Details
Printer: modded Ender3
Layers: 0.2-0.32mm
Nozzle: 0.5mm
Infill: 15%
Support: only build plate
Material: PLA
Technical Information
| 发表的日期 | 06/01/2021 |
| 材料数量 | 230g |
| 尺寸大小 | 180x170x115 |
More Information
Object Parts