Prickle, a character from Gumby, which is an American clay animation franchise, created and modeled by Art Clokey. The characters have been the subject of two television series, a feature-length film and other media.

Prickle is the series' tritagonist and is a yellow dragon, possibly a Plateosaurus, with sharp white spines. He speaks with a Midwestern accent. He is one of Gumby's friends.

No supports are required. If you have the proper filament colors, no painting is needed.

The assembled model is 115mm tall and is in proportion to my Gumby and Pokey models.

Enjoy!
...........................................................................................................

**Print Instructions:**
Supports: No
Resolution: .2mm
Infill: 10%

Notes:**

Refer to the notes below for a few helpful printing and assembly instructions.
...........................................................................................................

**Building the model:**
Colors

Black: (Paramount3D PLA - Black)
eye_blacks (contains two pieces)
..

White: (Paramount3D PLA - White)
eye_whites (contains two pieces)
scale_head
scale_back
scale_tail
..

Yellow: (Paramount3D PLA - Simpson Yellow)
body
..

...........................................................................................................

**Printing and assembly tips**

Printing tips
1-No supports are required

2-Use your judgement, however no rafts or brims are required.

..
Assembly tips:
1-The two eye_black pieces are identical and should be glued into the eye_whites first.

2-In order to ensure that no supports are required, the holes for the eyes are slanted on top. When inserting the eyes to the body, ensure the whites slanted part is on top as well.

3-Prickle is a clay character and as such, his eyes should bulge out.

4-Refer to the assembly diagram in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.

Do not hesitate to ask questions, feedback is essential to making better models.