Prusa MK3 Y-Axis Motor Mount (juiced)
Prusa MK3 Y-Axis Motor Mount (juiced)
3D
Published 2018-07-04T11:06:42+00:00
Okay so the Prusa MK3 in my opinion was a complete disaster on many levels. I won't complain about those at this time. To me this was a major weak link just adding to the issues. So I made a much stiffer y-axis motor mount. It's rock solid and fixed some of the mis-alignment issues of the factory motor mount. You can use the same mounting holes but I suggest to go ahead and drill a third hole for this mount but its not a complete necessity.
There is a great write up by RHDreambox on the Prusa forum. I give him the credit where it is due - check it out for even more fixes he did good work on all 3 Axis's. He was a main contributor to this file and thought process.
https://shop.prusa3d.com/forum/original-prusa-i3-mk3-f30/fine-tune-your-mk3-y-axis-t13851.html#p63653
Fine Print:
You might need to use a 12 mm M3 now instead of the 10 mm M3, this mount is a bit thicker so you need a tad bit longer screw. The rest is gravy. I printed with Slic3r PE, 50% infill, with Carbon Fiber PETG @ .2mm layer with 3-4 walls.
ok
| 发表的日期 | 04/07/2018 |
| 让时间去下载 | 360 - 720 分钟 |
| 材料数量 | 31 |
| 尺寸大小 | 91 101 33 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |