Qav-s DJI O3 camera mount
Qav-s DJI O3 camera mount
3D
Published 2022-12-24T18:03:04+00:00
This is a solution for the O3 camera not fitting the stock parts. Joshua Bardwell is machining new standoffs and as a machinist, naturally I will buy them. But for now this tpu mount replaces the standoffs and carbonfiber pieces. The camera is as far forward as I can get it while still giving it enough protection. Since the standoffs are removed Ive designed the holes to accept half inch long motor screws and the holes are slighty undersized for better bite. Im using stock screws on bottom and motor screws on top. In the event of an impact the top plate is going to hit first so the mount is a triangle which will reinforce the top plate. The screws keep things aligned but the real strength comes from the zip ties which take advantage of the slots for the carbon pieces. It is mostly hollow but it is no flimsy print. Although this is a temp solution it is robust. Its designed for the angle I fly but for those that need higher uptilt it can be had. Just take a razor and cut out the top bridge. The camera will be free to move, pivoting on the bottom camera screw. I like my cameras mounted low so I can put my chin on the pavement when I fly low so I have placed the camera as low as I can while still giving it full free range of motion from 25deg and up. (V2 update- Ive modified it slightly for those who want lower cam angle. I prefer the camera be held captive on all sides so the file will still print with the top bridge. The bridge is what prevents the camera from being able to rotate. Cut the bridge with a razor for full up or down tilt or leave the bridge for locked cam angle. The V1 file only has more uptilt.)
I have been cleaning up my tpu tune and I really like where Im at. Very little stringing and great bridging. Printing at the coolest temp that the flowrate can handle is giving me the cleanest prints.
.5 nozzle 200 degrees first layer/190 after
bed 65
fan 90
speed 45
bridge skin slow 15% speed 35
bridge wall flow 35% speed 35
coasting on
| 发表的日期 | 24/12/2022 |
| 让时间去下载 | 34 - 分钟 |
| 材料数量 | 7 |
| 支持自定义 | YES |