Print Settings

1 x RadiatorBody : Layer:0.15mm Raft:no Support:no Infill:15%
1 x RadiatorBodyBottom : Layer:0.15mm Raft:no Support:no Infill:15%
1 x RadiatorBodyTop : Layer:0.15mm Raft:no Support:yes(only for the funnel) Infill:15%
1 x RadiatorCap : Layer:0.15mm Raft:no Support:no Infill:15%
2 x RadiatorCoolerPort : Layer:0.15mm Raft:no Support:no Infill:100%
1 x RadiatorDrain : Layer:0.15mm Raft:no Support:yes Infill:100%
1 x RadiatorDrainGasket : Layer:0.15mm Raft:no Support:yes Infill:100%
1 x RadiatorSpout : Layer:0.15mm Raft:yes Support:no Infill:100%
1 x RadiatorHoseBottom : Layer:0.15mm Raft:no Support:yes(only external) Infill:100%
2 x RadiatorHoseBottomClamp : Layer:0.15mm Raft:no Support:no Infill:100%
1 x RadiatorHoseTop1 : Layer:0.15mm Raft:no Support:yes(only external) Infill:100%
1 x RadiatorHoseTop2 : Layer:0.15mm Raft:no Support:yes(only external) Infill:100%
2 x RadiatorHoseTopClamp : Layer:0.15mm Raft:no Support:no Infill:100%

Accessories

1 x m2x15mm SHCS
4 x m2x6mm SHCS
4 x m2 jam nut

Mounting

/!\ Before mounting the radiator, the engine output must be filed to allow connection of the high hose (look at the picture RadiatorTopHoleConnexion.jpg).

Fix the StarterBody1 to the Electric Drive with the m3 screws.
Glue the two RadiatorCoolerPort on the RadiatorBodyBottom.
Fix the RadiatorDrain and the RadiatorDrainGasket with the m2x15mm on the RadiatorBodyBottom.
Glue the RadiatorCap on the RadiatorBodyTop.
Insert the RadiatorSpout in the RadiatorBodyTop and glue it ; be careful, this piece is fragile.
Glue RadiatorBodyBottom on the RadiatorBody.
Glue RadiatorBodyTop on the RadiatorBody ; be careful, the hose connectors are on the same side.
Mount m2x6mm and m2 jam nuts on the two RadiatorHoseBottomClamp.
Insert the two RadiatorHoseBottomClamp on RadiatorHoseBottom and tighten without forcing.
Paste RadiatorHoseTop1 with RadiatorHoseTop2 in a 90% angle (look at picture RadiatorHoseTop.jpg).
Mount m2x6mm and m2 jam nuts on the two RadiatorHoseTopClamp.
Insert the two RadiatorHoseTopClamp on RadiatorHoseTop (two parts) and tighten without forcing.
Insert RadiatorHoseBottom on the engine input (bottom) without glueing ; long length on the engine side.
Insert RadiatorHoseTop (two parts) on the engine output (top) without glueing ; short length on the engine side.
Insert Radiator on the two Hose (Bottom and Top).
The radiator must be vertical and horizontal; if the radiator moves, glue the bottom hose on the engine input (bottom).