Rain Gauge /Rain Meter Fully Printable
Rain Gauge /Rain Meter Fully Printable
3D
Published 2019-10-06T11:55:12+00:00
An old school rain-gauge.
I designed it to be easily printable with no reworking and only one part needing minimal supports.
The scale is in l/m² or mm/m² (wich is essentially the same :) )
Total Dimensions: 230mm x 80mm (Minimum 190mm Print Hight needed)
Despite the look on the photo, the cylinder is actually quite transparent and it is easy to see the waterlevel inside.
1) Cylinder ~ 2.5h
Transparent PLA
0.2 mm layer thickness
Vase-Mode ("Spiralise Outer Contour" in Cura)
6 bottom layer to make it waterproof
Printed with Raft
2) Outer shell with mount for an 8mm rod ~9h
PLA
0.2 mm layer thickness
30% Infill
no Supports needed
Printed with Raft
3) Funnel ~3.5h
PLA
0.2 mm layer thickness
30% Infill
Supports (for angles >60% --- Needed only for the fastening-rod on the side)
Printed with Rafts
| 发表的日期 | 06/10/2019 |
| 尺寸大小 | 230mm x80mm (Tallest Part: 190mm) |