Raspberry Pi Soda Cam
3,949
views
78
downloads
0 comments
Loading comments...
Raspberry Pi Soda Cam
3D
Published 2017-08-16T14:49:29+00:00
10
0
Add to Collection
Description
I need a quick and easy way to posistion my rapberry pi camera. So, why not put it on top of an old 500ml soda bottle? I filled the soda bottle half way with water, but sand or dirt would probably be a safer fill material.
No supports are needed, I modeled in a sacrifical support for the part that slides onto the bottle cap. The holes are for M3 screws, and are too big to be tapped or threaded. It's just a friction fit onto the soda bottle.
Printing Details
0.25mm layer height.
25% infill (could easily be less)
3 top layers; 3 bottom layers
2 shells.
Technical Information
发表的日期 | 16/08/2017 |
让时间去下载 | - 120 分钟 |
材料数量 | 32 grams |
尺寸大小 | 86.37x107.79x44.53 |
打印工艺 | FDM |
复杂程度 | 中级 |
支持自定义 | YES |
More Information
Object Parts