Red Bull M&M Dispenser
Red Bull M&M Dispenser
3D
Published 2018-02-05T17:54:40+00:00
The Red Bull M&M Dispenser - Designed by My 14 year old son Jeff
Video: https://www.youtube.com/watch?v=JWeQv3n0DKU
Ration your supply of M&Ms with this awesome 3D Printed M&M Dispenser.
In Jeff's Words:
This idea was inspired by a similar contraption made from wood and a Mason Jar. When I saw this I wanted to make my own, only with a more common can.
Designing this was fun as it challenged my skills in 3D Modeling.
When I pulled it off my Prusa i3 I was super suprised to see that turned out really good (as it was my firts attempt with the measurements).
To My astonishment it worked! (As seen in the video)
Layer Height: 0.2
Shell
-Wall Thickness: 0.8
-Top/Bottom Thickness: 0.8
Infill: 20%
Speed
-Print Speed: 50 mm/s
-Travel Speed: 110 mm/s
Support is Needed
Build Plate Adhesion Type: Skirt
It Takes About 3 Hours and 45 Minutes
| 发表的日期 | 05/02/2018 |
| 让时间去下载 | - 225 分钟 |
| 材料数量 | 39 grams |
| 尺寸大小 | 89.0 x 130.0 x 42.0 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
