REDCAT Racing COE Hauler compatible side Toolboxes
$32.00 REDCAT Racing COE Hauler compatible side Toolboxes
3D
Published 2023-11-06T09:58:45+00:00
These are a DIY kit for installing working tool boxes on the new Redcat Racing 1963 Chevrolet COE Hauler.
Features 3 side tool boxes that open and close and use magnets for locks.
You will need the following to complete:
24 x M3 x 10mm flathead screws (this will do both sides)
12 x 0.25" x 0.0625" round magnets (roughly 5.8mm x 1.5mm, this amount does both sides)
A cut out template is provided as well.
11/15/2023 EDIT: I have added the following:
- V2 version of the frame for ease of printing, it will require additional screws but this allows the frames for each box to be printed separately and gives you the flexibility to install 1, 2 or all 3 boxes.
- updated tool box bodies with the logo facing inward
- Added files for each door, box and frame to be separate instead of all of them in one file.
** Copyright 2020 Gearguy's Customs. All rights reserved Important: The product can only be used editorially (educational, non-commercialize personal projects, in newsworthy and of public interest events) and may not be used for any commercial, promotional, resale, sharing or merchandising purposes.
Designed by Ricardo I. Suarez @ Gearguy's Customs. email for more information gearguycustoms@gmail.com
I am very grateful for choosing one of my 3D models to print.
-Sincerely
Ricardo I. Suarez
Gearguy's Customs LLC
Recommend using PETG at 0.2mm layer height, the backing frame can me printed at 0.3mm. To print both sides will requre roughly 700g of filament.
Parts require support, and you'll need a 256mm x 256mm or bigger build plate to print some of the parts. In order to print passenger side, mirror parts. Each side will take roughly 15 hours to print on a Babmbu Labs X1 Carbon
| 发表的日期 | 06/11/2023 |
| Price | $32.00 |
| 让时间去下载 | 1560 - 1800 分钟 |
| 材料数量 | 700g |
| 尺寸大小 | 258mm x 110mm x 62mm |
| 打印工艺 | FDM |