Remove before flight tag (Concorde Edition)
5,595
views
529
downloads
5
collections
0 comments
Loading comments... 
Remove before flight tag (Concorde Edition)
3D
Published 2018-05-16T12:34:41+00:00
109
0
Add to Collection
Description
I always wanted one of these tags, so I decided to make one myself. I chose to use the Concorde, as it is one of the most iconic and more recognizable airplanes in the world, despite not flying any more...
You can print it in two colors even if you only have one nozzle and it looks really cool.
Enjoy it!
Printing Details
Print in two colors by stopping the print and swapping filaments at 1.5 mm (or use your secondary nozzle from this height).
Be sure to increase a bit the flow for the first layer after the change of filaments to improve adhesion between materials.
My settings (you can vary them):
- Nozzle diameter: 0.4mm
- Speed: 35-40 mm/s
- Layer height: 0.15mm
- Infill: 100%
Technical Information
| 发表的日期 | 16/05/2018 |
| 让时间去下载 | 120 - 150 分钟 |
| 材料数量 | 19 grams |
| 尺寸大小 | 152.1mm x 67.0mm x 2.5mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |
More Information
Object Parts