ROKITA - Guardian Devil. Practical Filament Clips.
ROKITA - Guardian Devil. Practical Filament Clips.
3D
Published 2019-04-07T08:30:16+00:00
Rokita - Lord of the filament. Both ends of the filament do not get tangled up and will never be a problem during printing. The ends of the filament are conveniently clicked from the center into the horns of the devil. We do it in the first place when we are sure that the filament is not tangled. The best and safer at a distance of about 10 cm from the end. Then we securely clip the entire filament roll. You can specify the types of materials with the color of the clip. Very effective, fast and reliable. This is the Polish devil Rokita. On a daily basis, he looks after the willow tree in which he lives. He grows pears on this willow.
layers 0,2 mm, infill 100%, PLA, PET or ABS, suggested color for PLA - green, PET - yellow, ABS - grey, different color for each type ASA, TPU, etc. Do not press the first layer too much.
| 发表的日期 | 07/04/2019 |
| 让时间去下载 | 10 - 12 分钟 |
| 材料数量 | 1,6g |
| 尺寸大小 | 28x50x5 mm |
| 支持自定义 | YES |