runcam mini dvr tpu mount
runcam mini dvr tpu mount
3D
Published 2022-09-16T09:09:38+00:00
TPU mount for 20x20 runcam mini dvr available on amazon. This is a good cheap dvr to use with some of the stronger vtx options such as this 1watt mamba vtx. This mount is designed with a flexible flap that locks into place preventing premature sd card ejection while still providing convenient access to the sd card. It is designed to mount an enclosed vtx on top with the dvr below.
If you are not printing with .5 nozzel I suggest you start. Print times are faster, parts look better. I print with first layer bed temp 70>bed temp 65, first layer nozzel 200>nozzel temp 195, fan 80% print speed 40ish mm.
The file is programmed in inches. If it appears tiny, to display it correctly multiply the scale by 25.4 this just converts inches/millimeters. Some slicers I have to do this. Its a machinist trick.
| 发表的日期 | 16/09/2022 |
| 让时间去下载 | 40 - 分钟 |
| 材料数量 | 7 |
