Schlage Door Lock Replacement Button
5,256
views
84
downloads
0 comments
Loading comments... 
Schlage Door Lock Replacement Button
3D
Published 2018-01-26T17:48:14+00:00
6
0
Add to Collection
Description
What do you do when one of the keypad buttons on your door lock disappears?! ...3D print a replacement, of course! This button is designed specifically for the Schlage door lock model BE365 / BE365F. After printing it in flexible filament, draw on the number with a permanent pen, stuff some aluminium foil into the cavity, install, and use! Be sure there is enough aluminium foil to engage the circut board when pressed, but not so much that it is always making a connection (that would give you a dead battery). Here's a video of it in action: https://youtu.be/JLWk7bKw26w
Printing Details
0.2mm layer height, 20% infill
Technical Information
| 发表的日期 | 26/01/2018 |
| 让时间去下载 | 3 - 5 分钟 |
| 材料数量 | not much |
| 尺寸大小 | 8.3mm x 8.65mm x 10.3mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |
More Information
Object Parts
