SCX10 III GLADIATOR FLATBED
SCX10 III GLADIATOR FLATBED
3D
Published 2022-10-25T09:52:41+00:00
Want an overland style SCX10 iii Gladiator? You can now build one! The flat bed originally designed and printed for our SCX10 iii Gladiator Aussie Style Overland build, which can be found here
The flatbed comes with 2 different versions of an oversized, extra beefy chassis mount, one used for our build, and the other which is slidable for fine tune fore-aft adjustments.
Also included are 2 different styles of headache racks, a narrow one and a wide one. We used the narrow one in our build.
To complete the flatbed, the following hardware are needed:
5x M3*20mm countersunk screws for the headache rack
4x M3*15mm countersunk screws for the chassis mount plate
4x M3 nylock nuts for the chassis mount plate
7x M3*10mm countersunk screws for the rear bumper and fenders
6x M3*10mm socket head screws for the railings
4x M3 washers for the flatbed's adjustable chassis mount
4x M3*15 or 20mm socket head screws for mounting the flatbed to the chassis' rear brace
Please note that none of the accessories shown in the pictures are included, they are available separately in our store.
Please do not hesitate to contact us if you need any help!
PLA+
0.6mm nozzle
0.3-0.4mm layer heights
50% infill
| 发表的日期 | 25/10/2022 |