Sign - Smile You're On The Internet
Sign - Smile You're On The Internet
3D
Published 2018-09-04T12:04:01+00:00
A wall or fence sign I designed for the security camera setup I have installed, to really let potential criminals know that if they try anything, they are already recorded where they can't delete the footage. I hope you like it.
Printed with 0.2mm layers and layer change / filament change scripts at layer 12, 16. White, Black, Orange for filament order. Script for filament changes tested to work on my CR10 original from 2016 with no mods to bios. 20% infill, 2 Perimeters, and 3 to 5 bottom and top layers. I always do 5 so base and top are 1mm thick for strength and a smooth finish. You can mix it up as to what layer you do the filament changes depending on your needs.
Goes in Additional Terminal Commands for Post Processing section in S3D, no idea if that is usable in Cura etc.
{REPLACE "; layer 12" "M600\n; layer 12"}
{REPLACE "; layer 16" "M600\n; layer 16"}
S3D Build Estimate: Always off by 50% more. Assume time given is 2/3 of total.
Build time estimate in S3D: 8 hours 7 minutes. Actual around 10 hours depending on infill percentage and time wasted between filament changes) I was watching it on one of my new security camera's I put in the shed specifically for this reason.
Filament length: 52766.8 mm
Plastic weight: 158.65 g (0.35 lb)
Material cost: 7.30
| 发表的日期 | 04/09/2018 |
| 让时间去下载 | 14 - 分钟 |
| 材料数量 | 160g |
| 尺寸大小 | 260x200 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |
