Silent Hill 2 - Radio
Silent Hill 2 - Radio
3D
Published 2023-05-30T16:14:50+00:00
A recreation of the radio from the second game in the Silent Hill series. You can now print out and wave around the iconic static-blasting monster-detector that James finds next to his first kill.
Recreated based on the in-game mesh, it stays faithful while adding realistic (and practical, print-wise) features.
Includes each part (requires some assembly), a full print (not tested and may cause suction issues, but included for people that want to try it) and a pre-arranged STL/chitubox to customise the supports.
Note that my pre-arranged version has the radio printing arrathed to the base of the print bed. If your bed is scratched or your printer elephant-foots particularly badly you may want to re-support this at an angle.
With certain resins the battery hatch may also warp slightly post-curing. You can (carefully) use hot/boiling water to re-soften the resin and flatten the shape to fit the hatch opening.
| 发表的日期 | 30/05/2023 |