Simple Strong Headset Wall Mount
Simple Strong Headset Wall Mount
3D
Published 2020-05-14T10:31:23+00:00
I have designed a simple, but yet strong headset wall mount. Dimensions are 90mm length, 30mm width, 43mm depth, 8mm in thickness, & mounting holes are 4mm.
Note to content creators (YouTube, Patreon, Educators, etc). Yes I understate that you are "technically" getting paid in the backend for creating content & thank you for creating that content. So to expand everyone's knowledge, you have permission to use this design in your content as long as you: State that it is not yours & acknowledge who designed it. Provide a link to where you got it from, so others can download & enjoy it as well.
BTW if you like my design, please don't forget the click the "like" button & show you appreciation.
Thanks & Enjoy!
I printed it on a glass build sheet using binder clips to hold onto the ceramic glass bed that the Tevo Tornado has & applied a glue stick to the glass build sheet, so that the print can adhere to. Using Sunlu PLA+ black filament the initial bed temp was 70C, nozzle temp 215, no cooling fan, & print slow on the first layer (I had it at 25). On the 2nd layer to finish drop to bed temp 60C, nozzle temp 215, cooling fan high, & increase print speed back to normal. Note: I did use a skirt to prime the nozzle, but is it your choice.
| 发表的日期 | 14/05/2020 |
| 支持自定义 | YES |
