Small case for Raspberry Pi A+
- 电子产品 |
- 电子产品>
- 电脑配件 |
- 电子产品>
- Arduino, Raspberry & DIY
Support Free
Featured
6,881
views
308
downloads
4
collections
0 comments
Loading comments...
Small case for Raspberry Pi A+
3D
Published 2015-09-25T17:47:47+00:00
34
0
Add to Collection
Description
Simple Case for a RaspberryPi A+. Pick a case and a lid that suit your needs. 4x M2.5x5 or M2.5x6 and, depending on the box, 4x M2.5 nuts are needed to mount the Raspberry Pi A+
Technical Information
发表的日期 | 25/09/2015 |
让时间去下载 | 60 - 180 分钟 |
材料数量 | 30 grams |
尺寸大小 | 70 x 61 x 20 mm |
打印工艺 | FDM |
复杂程度 | 容易 |
支持自定义 | YES |
More Information
Object Parts
Printed on an M3D micro using Sunset Orange 3D Ink™, which I think is PLA. Quality: Very High Quality (150 microns) Fill: (250 microns) Print Attempts: first attempt (base), second attempt (lid) (first attempt was printed with raft which was a nuisance without the correct tools to remove it). Raft: yes (base), lid (no) Printing Time: a few hours for the base, about an hour for the lid. Observations: 1. The slot for the camera cable is not at the same position horizontally as the connector, so a loop has to be fed into the box to stop the cable form being twisted. 2. When closed the lid is slightly bent, but this could probably be fixed by trimming the hinges / holes a little.