Sponge holder
Support Free
Featured
1,622
views
1
collection
2 comments
Loading comments...
$3.00 Sponge holder
3D
Published 2023-11-15T08:37:40+00:00
9
2
Add to Collection
Description
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
A useful sponge and cloth holder for a tidy kitchen. Just throw your wet cloth on top and place the sponge and scourer below. The grid is easy to remove to clean the drip tray.
I started using solid dishwashing soap for less plastic waste – they can also be placed on the grid.
Size assembled: 240 x 96 x 220 mm
This is the V5
Printing Details
- Required build volume: 240 x 240 x 100mm ( works on a P1P if you move it a bit from the center)
- Material usage: 130g
- Material: PLA
- Print direction: stls are rotated correctly, check images
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 3
- Infill: 15%
- Build plate adhesion type: none
- Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.
Technical Information
| 发表的日期 | 15/11/2023 |
| Price | $3.00 |
| 支持自定义 | YES |
More Information
Object Parts