Stomp Rocket (Flexible Plunger)
Stomp Rocket (Flexible Plunger)
3D
Published 2022-11-21T11:48:13+00:00
This model is printed in 4 pieces and the Plunger is designed to work with flexible filaments. There are 4 files to print: the Plunger, Base, and Nozzle, and Rocket. The Plunger HAS to be printed in flexible filament (I used Flexible PLA by Ataraxia Arts), and I would recommend printing the rocket in flexible as well so it doesn't break or cause damage.
This design is uploaded with a non-commercial license. If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at https://www.patreon.com/thinair3D
These are just the settings I used to test the model, feel free to use whatever settings work best for you.
- FDM or Resin: FDM
- Scaling: Scaling up should be fine, scaling down may affect the threads for the nozzle.
- Supports: None
- Infill/Perimeters: 3 Perimeters on the Plunger! For the other pieces, I used 2 perimeters and 10% infill.
- Nozzle Size: 0.4
- Layer Height: I used 0.2 layer height. Would probably be fine to use a high layer height (except plunger).
| 发表的日期 | 21/11/2022 |