Stroller Bag Adapter
Stroller Bag Adapter
3D
Published 2020-08-28T20:45:14+00:00
Decided to make an adapter to have the diaper bags handy while using the stroller. Worked remarkably well. One year and a half and still going strong.
Print a pair and hang whatever needed from the stroller handlebar :)
This has been tested only on the Balios S Stroller. They slide smoothly on top of the adapter post.
Added version 2 which has a larger hole for other type of hooks or hanging devices.
If you like design let me know! Also why not support with some money for coffee/beer or filament :).
# Update 27.09.2020
It finally happend, the first adapters just broke. Although after a year and few months of good use. They did not survided and extra heavy diaper bag and an hour stroll on cobbled roads. Still very satisified with them.
New version 3 adds more material to the parts with more stress. Print with support everywhere. It takes few minutes to remove them but if you dont use them it will also take you some minute to remove the overhang drooping plastic.
Supports are required. They are slighlty difficult to remove if your printer is not well tuned. Otherwise they come off very nicely.
| 发表的日期 | 28/08/2020 |
| 让时间去下载 | 29 - 30 分钟 |
| 材料数量 | 5.67g -7g |
| 尺寸大小 | 32x57.52x7.80 mm |