(TASmaker's) Folding Spool Holder (3DPN Design Comp)
(TASmaker's) Folding Spool Holder (3DPN Design Comp)
3D
Published 2018-08-20T16:28:53+00:00
(TASmaker's) Folding Spool Holder (3DPN Design Comp)
This spool holder, created for 3DPN design competition, is designed to self centre and lock in place on a timber (1"x1.5") spool rack. It can be folder up out of the way. The rear hook can be pushed under a resting spool without needing to be removed first.
Must be printed on its side. Can be printed with 0.8mm shell and 10% infill, however a thicker shell and higher infill will only make this model stronger. Hinge "seal" is cracked open by carefully closing the hinge. May require a higher bed temperature (or higher ambient temperature, eg an enclosure) to prevent warping. However, a warped model will still be functional.
| 发表的日期 | 20/08/2018 |
| 让时间去下载 | 2 - 25 分钟 |
| 材料数量 | 24g (min) |
| 尺寸大小 | 150mm x 68.5mm x 25mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |