The Freighter Benchy
The Freighter Benchy
Published 2019-01-28T17:55:45+00:00
Finally, the legendary benchy has a friend! Modelled from scratch in fusion 360, the Freighter Benchy is a model I created to address some of the features that the original did not. If you are bench marking, I highely suggest printing both the freighter benchy and the original benchy so that you can benchmark your machine as much as possible!
The anchor mid ship benchmarks you printer's ability to print in detail at various layer heights; the oddly placed chimney benchmarks your printer's retraction (I found it caused quite a bit of stringing); and the severe angled overhang tests you printer's cooling and ability to print out into open space.
Happy Printing!
Print Settings:
200 Microns
70 mm/s
25% square infill
7 top and bottom layers
发表的日期 | 28/01/2019 |
让时间去下载 | - 45 分钟 |
尺寸大小 | 70 x 50 x 30 |
支持自定义 | YES |
I love it! Perfect thing to print in addition to the OG benchy. Great job!