Utility Belt Loop Attachment
Utility Belt Loop Attachment
3D
Published 2018-09-07T14:12:12+00:00
A belt loop designed for those adjustable fabric belts that attaches knife cases or whatever to your belt. The stl only fits on one of my fabric belts but i had to scale it up by 110% for it to fit the other ones. Most of the knives like this don't have a way to wear it and take up too much room in the pockets, so i made this and now it's not a "concealed weapon" as it's out in the open for all to see :) Just super glue it to something and wear it on your belt!
P.s. Added 45mm loop that fits much better on wider belts but with both loops, belt must have end trimmed off and superglued(if cotton) or flame treated(if polyester blend) to prevent fraying or unraveling of the belt end.
- 100% infill
- .2mm layer height
- Printed with narrow flat side touching plate
- no supports needed
| 发表的日期 | 07/09/2018 |
| 材料数量 | 6-9g |
| 支持自定义 | YES |