Viking Oarsmen (Improved)
Viking Oarsmen (Improved)
3D
Published 2020-05-04T19:08:43+00:00
Here are all four seated viking crewmen again (in right-side/left-side pairs), with slight upgrades:
1. More believable chain mail shirts. I've added proper sleeves going down to the elbows now, which is as it should be.
2. Hands are properly cupped now to receive the tip of an oar which can be glued there.
3. Other slight nips/tucks, e.g. more hair and more natural positioning of feet. Also, they are smaller - my previous seated ones had been more like 1:65 scale rather than the intended 1:72 - likely a common beginners' mistake that I only noticed when I started doing the standing versions. It will be not as cramped on the boats now with these guys :)
You might be disappointed by how clean shaven these guys are. I was shooting for late era Vikings from the dynastic wars period after 1000AD. They might also be Normans on the way to Sicily. Having a bunch of baptized Christians may take the fun out of Vikings for some. Pagan beards and long braids are coming next so that we can take them some 100-200 years further back.
There are some pointy ends here, so watch out for the tips of the knives and note that some guys have swords resting in their laps while they are rowing. When mounting, I follow this sequence: loosely place Viking on his seat next to the aperture for the oar. Next, test by adding the oar through the opening - the tip of the oar should go in the cupped hand that is furthest from the side of the ship that Mr. Viking is sitting next to. Check to see how Viking must be placed on the seat so that the other hand will also rest on the oar. I then glue the Viking that position, and after that add the oar. See attached images for how that looks in the end.
| 发表的日期 | 04/05/2020 |